How to Effortlessly Install Monkey Tails on Your Bow String- A Step-by-Step Guide

How to Install Monkey Tails on Bow String

Installing monkey tails on your bow string can add a touch of style and improve the overall look of your bow. Monkey tails are a popular choice among archers and hunters for their unique appearance and durability. In this article, we will guide you through the process of installing monkey tails on your bow string, ensuring a successful and stylish upgrade to your archery equipment.

Materials Needed:

Before you begin, gather the following materials:

– Monkey tails (choose the length and color that suits your preference)
– Bow string (make sure it is in good condition)
– Stringing tools (stringing pliers, bow press, and a stringing loop)
– Stringing wax
– Stringing vise

Step 1: Prepare Your Bow

1. Remove the bowstring from your bow and set it aside. Ensure that the bow is in a safe position, either by using a bow press or by securing it with a stringing vise.
2. Clean the bowstring with a soft cloth to remove any dirt or debris. This will help ensure a better grip and longevity of the monkey tails.

Step 2: Stringing the Monkey Tails

1. Take one end of the monkey tail and loop it around the bowstring. Make sure the tail is positioned at the desired height on the string.
2. Repeat the process for the other end of the monkey tail, looping it around the string and ensuring it is at the same height as the first tail.
3. Once both tails are looped around the string, tie a knot at the base of each tail to secure them in place. Ensure that the knot is tight enough to hold the tails, but not so tight that it damages the string.

Step 3: Adjusting the Monkey Tails

1. Take a look at the monkey tails to ensure they are evenly spaced and at the desired height. If necessary, adjust the tails by gently pulling them in the direction you want to move them.
2. Once you are satisfied with the position of the monkey tails, retie the knots at the base of each tail to secure them in place.

Step 4: Waxing the Bow String

1. Apply a small amount of stringing wax to the bowstring, focusing on the area where the monkey tails are attached. This will help prevent the string from fraying and will ensure a better grip for the monkey tails.
2. Rub the wax into the string using your fingers or a soft cloth until it is evenly distributed.

Step 5: Reinstalling the Bow String

1. With the monkey tails securely attached and the string waxed, it is time to reinstall the bowstring onto your bow.
2. Follow the appropriate stringing procedure for your specific bow model, ensuring that the string is properly tensioned and aligned.

Congratulations! You have successfully installed monkey tails on your bow string. Enjoy the stylish addition to your archery equipment and show off your unique flair on the range or in the field.