Step-by-Step Guide to Installing a Handheld Shower Diverter for a Modern Bathing Experience

How to Install Hand Held Shower Diverter

Installing a hand held shower diverter is a great way to upgrade your bathroom experience. Not only does it provide convenience and flexibility, but it also adds a touch of modern elegance to your shower area. Whether you’re a DIY enthusiast or a novice, this guide will walk you through the steps to install a hand held shower diverter successfully.

Materials and Tools Needed

Before you begin, gather the following materials and tools:

– Hand held shower diverter kit
– Adjustable wrench
– Pliers
– Screwdriver
– Teflon tape
– plumber’s grease
– Gloves and safety glasses

Step 1: Turn Off the Water Supply

To avoid any accidents or water damage, it’s crucial to turn off the water supply to your shower before starting the installation. Locate the shut-off valves and turn them clockwise to close them.

Step 2: Remove the Existing Shower Head

Using the adjustable wrench, loosen and remove the existing shower head from the shower arm. Be sure to keep track of any washers or gaskets that come off during this process.

Step 3: Install the Diverter Arm

Attach the diverter arm to the shower arm using the provided nuts and washers. Make sure the diverter arm is securely fastened and that it’s aligned with the shower head’s position.

Step 4: Connect the Diverter to the Shower Arm

Attach the diverter to the shower arm using the provided nuts and washers. Ensure that the diverter is securely fastened and that the threads are properly aligned.

Step 5: Install the Hand Held Shower Head

Attach the hand held shower head to the diverter arm using the provided nuts and washers. Make sure the shower head is securely fastened and that the threads are properly aligned.

Step 6: Test the Installation

Turn on the water supply and test the installation. Make sure the hand held shower head and the fixed shower head are functioning correctly. If there are any leaks, tighten the connections and check again.

Step 7: Apply plumber’s grease and Teflon tape

To prevent future leaks, apply plumber’s grease to the threads of the diverter arm and the shower head. Also, wrap Teflon tape around the threads of the diverter arm and the shower head before reattaching them.

Step 8: Reattach the Shower Head

Reattach the shower head to the diverter arm using the provided nuts and washers. Make sure the shower head is securely fastened and that the threads are properly aligned.

Step 9: Clean Up and Final Touches

Wipe away any excess plumber’s grease or Teflon tape, and ensure that all connections are clean and dry. Test the installation one last time to make sure everything is working as expected.

Congratulations! You’ve successfully installed a hand held shower diverter. Enjoy your upgraded bathroom experience and the convenience it brings.