How to Effectively Replace Windshield Wipers on Your Dodge Journey- A Step-by-Step Guide

How to Replace Windshield Wipers Dodge Journey

Replacing the windshield wipers on your Dodge Journey is a task that can be easily accomplished with the right tools and a bit of patience. Whether your wipers are streaking, making a squealing noise, or simply not clearing the windshield effectively, this guide will walk you through the process of replacing them. Follow these steps to ensure your Dodge Journey’s visibility is maintained during inclement weather.

1. Gather the Necessary Tools and Materials

Before you begin, gather the following tools and materials:
– Replacement windshield wipers
– Screwdriver (if necessary)
– Gloves (optional)
– Clean rag

2. Park Your Dodge Journey on a Level Surface

Find a safe and level surface to park your Dodge Journey. Engage the parking brake and turn off the engine to prevent any unexpected movements while you work.

3. Locate the Wiper Arms

Open the driver’s door and locate the wiper arms on the windshield. They are typically connected to the motor at the base of the windshield.

4. Remove the Wiper Arms

Using your hands, gently pull the wiper arm away from the windshield. Some models may require you to press a tab or release mechanism on the arm to detach it. Once the arm is loose, it can be pulled away from the windshield.

5. Remove the Wiper Blades

With the wiper arm removed, you should be able to see the wiper blade attached to the arm. Gently press the release tab or lever on the blade and pull it away from the arm. Be careful not to pull too hard, as the blade can break.

6. Install the New Wiper Blades

Take your new wiper blades and attach them to the wiper arms. Press the release tab or lever on the blade to secure it in place. Make sure the blade is properly aligned with the arm and the windshield.

7. Reattach the Wiper Arms

Once the new wiper blades are installed, reattach the wiper arms to the motor at the base of the windshield. Make sure the arms are securely connected before closing the driver’s door.

8. Test the New Wipers

Start your Dodge Journey and turn on the windshield wipers to test the new blades. Check for any streaking, noise, or uneven movement. If the wipers are working properly, you have successfully replaced the windshield wipers on your Dodge Journey.

By following these simple steps, you can ensure that your Dodge Journey’s windshield wipers are in good working condition, providing clear visibility during rainy or snowy weather. Remember to keep an eye on the condition of your wipers and replace them as needed to maintain optimal performance.