How to Safely Remove the Battery from Your Dodge Journey- A Step-by-Step Guide

How to Remove Battery from Dodge Journey

Removing the battery from a Dodge Journey is a task that requires careful handling and attention to safety. Whether you need to replace the battery, perform maintenance, or simply remove it for transportation, this guide will walk you through the process step by step.

Step 1: Park the Vehicle on a Level Surface

Before you begin, ensure that the Dodge Journey is parked on a level surface and the engine is turned off. This will prevent any accidental movement of the vehicle while you are working on the battery.

Step 2: Disconnect the Negative Terminal

Locate the battery in the engine compartment, typically on the driver’s side. Use a socket wrench to loosen the negative terminal bolt, which is usually marked with a “-” sign. Once the bolt is loose, carefully remove the negative terminal from the battery post.

Step 3: Disconnect the Positive Terminal

After the negative terminal is disconnected, move on to the positive terminal. The positive terminal is usually marked with a “+” sign. Loosen the bolt and remove the terminal from the battery post.

Step 4: Remove the Battery

With both terminals disconnected, the battery should be loose. Carefully lift the battery out of the engine compartment. Be cautious, as the battery can be heavy and may require assistance to remove.

Step 5: Place the Battery in a Safe Location

Once the battery is removed, place it on a flat, stable surface in a well-ventilated area. Avoid placing the battery on a carpet or any material that could potentially cause a fire.

Step 6: Install the New Battery

If you are replacing the battery, follow the same steps in reverse order to install the new battery. Make sure to connect the positive terminal first, followed by the negative terminal.

Step 7: Test the New Battery

After installing the new battery, reconnect the terminals and start the engine to ensure that the battery is functioning properly. Check the dashboard warning lights to confirm that there are no issues.

By following these steps, you can safely remove the battery from your Dodge Journey. Remember to take proper precautions and handle the battery with care to avoid any accidents or damage.