How to Install a Hand Held Shower
Installing a hand held shower can be a great addition to your bathroom, providing convenience and flexibility. Whether you’re looking to replace an outdated showerhead or simply enhance your showering experience, this guide will walk you through the steps to install a hand held shower with ease.
Materials Needed:
Before you begin, gather the following materials:
– Hand held showerhead
– Shower arm
– Shower arm adapter (if necessary)
– Shower arm flange
– Shower arm nut
– plumber’s tape
– Adjustable wrench
– Screwdriver
Step 1: Turn Off the Water Supply
To prevent any water from escaping during the installation process, turn off the water supply to your shower. This can typically be done by turning the valves located behind the shower wall.
Step 2: Remove the Existing Showerhead
Using an adjustable wrench, loosen and remove the existing showerhead from the shower arm. If the showerhead is connected to a diverter valve, you may need to remove the valve as well.
Step 3: Install the Shower Arm Adapter (if necessary)
If your new hand held showerhead requires an adapter to fit your existing shower arm, attach the adapter to the shower arm using plumber’s tape and a screwdriver. Tighten the adapter securely.
Step 4: Attach the Shower Arm Flange
Place the shower arm flange over the shower arm and secure it with the shower arm nut. Tighten the nut using an adjustable wrench until the flange is snug against the shower wall.
Step 5: Install the Shower Arm
Slide the shower arm through the shower wall and secure it in place using the provided mounting hardware. Tighten the hardware with a screwdriver until the shower arm is firmly attached.
Step 6: Attach the Hand Held Showerhead
Thread the hand held showerhead onto the shower arm, ensuring that it is securely fastened. If your showerhead has a diverter valve, connect the valve to the shower arm using the provided connectors and plumber’s tape.
Step 7: Test the Hand Held Shower
Turn on the water supply and test the hand held shower to ensure that it is functioning properly. Adjust the showerhead and arm as needed to achieve the desired height and angle.
Step 8: Clean Up
Dispose of any packaging and materials used during the installation. Clean up any spills or drips to maintain a clean and safe bathroom environment.
Congratulations! You’ve successfully installed a hand held shower. Enjoy your new, convenient showering experience.
