How to Wirelessly Connect Your Lorex DVR to the Internet- A Step-by-Step Guide

How to Connect Lorex DVR to Internet Wireless

In today’s digital age, having a Lorex DVR (Digital Video Recorder) connected to the internet can greatly enhance the functionality and convenience of your home security system. Whether you want to access your surveillance footage remotely or set up motion detection alerts, connecting your Lorex DVR to the internet wirelessly is a straightforward process. In this article, we will guide you through the steps to connect your Lorex DVR to the internet wirelessly.

Step 1: Check Compatibility

Before you begin, ensure that your Lorex DVR is compatible with wireless internet connectivity. Most Lorex DVR models support Wi-Fi connectivity, but it’s always a good idea to check the specifications of your DVR to confirm compatibility.

Step 2: Gather Necessary Equipment

To connect your Lorex DVR to the internet wirelessly, you will need the following equipment:

– Lorex DVR
– Wireless router
– Ethernet cable
– USB flash drive (optional, for firmware updates)

Step 3: Connect the Lorex DVR to the Router

1. Connect one end of the Ethernet cable to the WAN (Wide Area Network) port on your Lorex DVR.
2. Connect the other end of the Ethernet cable to the LAN (Local Area Network) port on your wireless router.
3. Power on your Lorex DVR and wait for it to boot up.

Step 4: Access the Lorex DVR’s Web Interface

1. Open a web browser on your computer or mobile device.
2. Enter the Lorex DVR’s IP address in the address bar. The default IP address is usually 192.168.1.108. If you have changed the IP address, use the new address instead.
3. You may be prompted to enter a username and password. The default username is usually ‘admin’, and the default password is often ‘admin’ as well. If you have changed these credentials, use your custom username and password.

Step 5: Set Up Wireless Internet Connection

1. Once you have accessed the Lorex DVR’s web interface, navigate to the ‘Network’ or ‘Wireless’ settings page.
2. Look for the ‘Wireless Settings’ or ‘Wireless Network’ section.
3. Select ‘Enable’ or ‘Wireless’ to turn on the wireless functionality.
4. Choose your wireless network from the list of available networks.
5. Enter the Wi-Fi password for your network.

Step 6: Confirm Connection

1. After entering the Wi-Fi password, click ‘Save’ or ‘Apply’ to save the changes.
2. Wait for a few moments for the Lorex DVR to connect to the internet wirelessly.
3. Once connected, you should see a confirmation message on the web interface.

Step 7: Test the Connection

1. Open the Lorex Viewer app on your computer or mobile device.
2. Enter the Lorex DVR’s IP address and log in using your credentials.
3. If the connection is successful, you should be able to view your surveillance footage remotely.

Congratulations! You have successfully connected your Lorex DVR to the internet wirelessly. Now you can enjoy the benefits of remote access and enhanced security features.