Step-by-Step Guide- How to Safely Change the Presser Foot on Your Kenmore Sewing Machine

How to Change Presser Foot on Kenmore Sewing Machine

Sewing machines are incredibly versatile tools that can handle a wide range of projects. One of the most important parts of a sewing machine is the presser foot, as it helps to hold the fabric in place while you sew. Over time, you may need to change the presser foot on your Kenmore sewing machine to accommodate different types of fabric or sewing techniques. In this article, we will guide you through the process of how to change presser foot on Kenmore sewing machine step by step.

Step 1: Gather the Necessary Tools

Before you begin, make sure you have the following tools and materials:

– A new presser foot (if needed)
– A screwdriver (if your Kenmore sewing machine requires it)
– A small flathead screwdriver (for removing the presser foot)
– A piece of fabric to test the new presser foot

Step 2: Unplug the Sewing Machine

For safety reasons, always unplug your Kenmore sewing machine before attempting to change the presser foot. This will prevent any accidental start-ups or electrical shocks.

Step 3: Remove the Old Presser Foot

Locate the presser foot on your Kenmore sewing machine. It is usually attached to the machine with a screw or a lever. To remove the old presser foot, follow these steps:

– If the presser foot is attached with a screw, use a screwdriver to loosen and remove the screw.
– If the presser foot is attached with a lever, simply press the lever to release the foot from the machine.

Step 4: Attach the New Presser Foot

Now that the old presser foot is removed, you can attach the new one. Follow these steps:

– Place the new presser foot onto the sewing machine, aligning it with the foot holder.
– If the presser foot is attached with a screw, tighten the screw securely.
– If the presser foot is attached with a lever, ensure that the lever is properly engaged to hold the foot in place.

Step 5: Test the New Presser Foot

To make sure the new presser foot is working correctly, plug in your Kenmore sewing machine and test it. Place a piece of fabric under the presser foot and lower the needle. If the fabric is held in place as you sew, the presser foot is functioning properly.

Step 6: Clean and Store the Old Presser Foot

If you have any old presser feet, it’s a good idea to clean them before storing them. Wipe them down with a soft cloth and store them in a safe place, such as a sewing box or drawer.

Conclusion

Changing the presser foot on your Kenmore sewing machine is a simple and straightforward process. By following these steps, you can easily switch between different presser feet to accommodate various sewing projects. Always remember to unplug the machine for safety and take your time to ensure that the new presser foot is securely attached. Happy sewing!