How to Put Dodge Journey in Neutral
Putting your Dodge Journey in neutral is a fundamental aspect of driving safety and a necessary step before parking or when you want to disengage the transmission. Here’s a step-by-step guide on how to put your Dodge Journey in neutral.
Step 1: Ensure the Vehicle is Stationary
Before you can put your Dodge Journey in neutral, make sure the vehicle is completely stationary. This means the car should not be moving or rolling, and the brakes should be engaged.
Step 2: Turn the Ignition Key to Access the Gear Shift
Locate the ignition key in the ignition cylinder. Turn the key to the “II” position, which is the accessory position. This will allow you to access the gear shift without starting the engine.
Step 3: Engage the Parking Brake
Before shifting the gear to neutral, ensure that the parking brake is engaged. This will prevent the vehicle from rolling while you shift gears.
Step 4: Shift to Neutral
With the parking brake engaged, take your foot off the brake pedal. Reach down and move the gear shift lever into the neutral position. This is usually marked with a “N” on the gear shift or a round indicator.
Step 5: Release the Parking Brake
Once the gear shift lever is in the neutral position, you can release the parking brake. This step is crucial to ensure the car does not roll when you release the brakes.
Step 6: Confirm the Gear Shift
After releasing the parking brake, check the gear shift lever to confirm that it is indeed in the neutral position. It should not be in any other gear.
Step 7: Turn Off the Ignition Key
When you are done and the car is in neutral, it’s a good practice to turn off the ignition key to save battery power and ensure the engine is not running unnecessarily.
Remember, shifting your Dodge Journey into neutral is a critical step for safe driving and parking. Always follow these steps to ensure your safety and the safety of others on the road.
